Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ecran 10p
#41
(08-31-2017, 10:16 AM)raoulh Wrote: Je viens de faire une nouvelle image avec 2-3 drivers en plus dans le noyau donc un qui ressemble au N-trig...

https://calaos.fr/download/experimental/...-31.tar.xz

Est ce que vous pouvez tester?

Bon du coup je viens de test et ca ne donne rien de plus Confused  sauf erreur de ma part auquel cas vaut mieux attendre le retour de maktibab si il peut également test.
Reply
#42
Hello tous le monde.

Dsl pour la période d'absence ...
Je veux bien tester mais ... je suis sur meleg et je ne trouve pas l'iso Sad
Reply
#43
Je ne sais plus vraiment ce dont tu as besoin pour faire avancer le truc ...

Alors dans le doute voici le contenu de mon dmesg après un démarrage :


Code:
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 3.4.79 (ubuntu@calaos-os) (gcc version 4.8.1 (GCC) ) #1 PREEMPT Thu Sep 11 17:56:59 UTC 2014
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: sun4i
[    0.000000] Memory Reserved:
[    0.000000]  SYS  : 0x43000000 - 0x4300ffff  (  64 kB)
[    0.000000]  G2D  : 0x50000000 - 0x50ffffff  (  16 MB)
[    0.000000]  LCD  : 0x51000000 - 0x52ffffff  (  32 MB)
[    0.000000] cma: CMA: reserved 192 MiB at 43c00000
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] sunxi: Allwinner A10 revision C (AW1623/sun4i) detected.
[    0.000000] On node 0 totalpages: 262144
[    0.000000] free_area_init_node: node 0, pgdat c088bf98, node_mem_map d3000000
[    0.000000]   DMA zone: 512 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 65024 pages, LIFO batch:15
[    0.000000]   Normal zone: 1008 pages used for memmap
[    0.000000]   Normal zone: 128016 pages, LIFO batch:31
[    0.000000]   HighMem zone: 528 pages used for memmap
[    0.000000]   HighMem zone: 67056 pages, LIFO batch:15
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1024MB = 1024MB total
[    0.000000] Memory: 783784k/783784k available, 264792k reserved, 270336K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07f7030   (8125 kB)
[    0.000000]       .init : 0xc07f8000 - 0xc0824000   ( 176 kB)
[    0.000000]       .data : 0xc0824000 - 0xc0897320   ( 461 kB)
[    0.000000]        .bss : 0xc0897344 - 0xc0952b08   ( 750 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:128
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] Console: colour dummy device 80x30
[    0.006004] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
[    0.050262] pid_max: default: 32768 minimum: 301
[    0.053870] Mount-cache hash table entries: 512
[    0.057744] Initializing cgroup subsys cpuacct
[    0.061147] Initializing cgroup subsys devices
[    0.064543] Initializing cgroup subsys freezer
[    0.067787] Initializing cgroup subsys blkio
[    0.071340] CPU: Testing write buffer coherency: ok
[    0.078889] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    0.084436] Setting up static identity map for 0x4058a760 - 0x4058a7b8
[    0.087328] devtmpfs: initialized
[    0.089550] dummy:
[    0.102728] NET: Registered protocol family 16
[    0.110531] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.115840] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.119348] Init eGon pin module V2.0
[    0.124767] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
[    0.126872] Initialize DMAC OK
[    0.134064] bio: create slab <bio-0> at 0
[    0.137445] sunxi_gpio driver init ver 1.3
[    0.142989] gpiochip_add: registered GPIOs 1 to 4 on device: A1X_GPIO
[    0.146005] SCSI subsystem initialized
[    0.148984] libata version 3.00 loaded.
[    0.153575] usbcore: registered new interface driver usbfs
[    0.157883] usbcore: registered new interface driver hub
[    0.162011] usbcore: registered new device driver usb
[    0.165657] Linux video capture interface: v2.00
[    0.171193] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.174067] Bluetooth: Core ver 2.16
[    0.177521] NET: Registered protocol family 31
[    0.182824] Bluetooth: HCI device and connection manager initialized
[    0.186656] Bluetooth: HCI socket layer initialized
[    0.190673] Bluetooth: L2CAP socket layer initialized
[    0.194513] Bluetooth: SCO socket layer initialized
[    0.199989] cfg80211: Calling CRDA to update world regulatory domain
[    0.204418] Switching to clocksource aw_64bits_counter
[    0.206450] FS-Cache: Loaded
[    0.208563] CacheFiles: Loaded
[    0.217886] NET: Registered protocol family 2
[    0.224154] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.230995] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.238210] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[    0.244278] TCP: Hash tables configured (established 131072 bind 65536)
[    0.246463] TCP: reno registered
[    0.251268] UDP hash table entries: 512 (order: 1, 8192 bytes)
[    0.256503] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[    0.260003] NET: Registered protocol family 1
[    0.265137] RPC: Registered named UNIX socket transport module.
[    0.268851] RPC: Registered udp transport module.
[    0.272507] RPC: Registered tcp transport module.
[    0.277895] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.282953] audit: initializing netlink socket (disabled)
[    0.286646] type=2000 audit(0.279:1): initialized
[    0.290711] highmem bounce pool size: 64 pages
[    0.299600] VFS: Disk quotas dquot_6.5.2
[    0.304972] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.310635] NFS: Registering the id_resolver key type
[    0.314830] NTFS driver 2.1.30 [Flags: R/W].
[    0.318165] fuse init (API version 7.18)
[    0.321542] msgmni has been set to 1386
[    0.331587] alg: comp: Compression test 1 failed for lzo-generic: output len = 57
[    0.334732] alg: No test for stdrng (krng)
[    0.341388] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.344272] io scheduler noop registered
[    0.347494] io scheduler deadline registered
[    0.351254] io scheduler cfq registered (default)
[    0.355890] sunxi disp driver loaded (/dev/disp api 1.0)
[    0.398679] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.402755] [uart]: used uart info.: 0x01
[    0.407342] [uart]: serial probe 0 irq 1 mapbase 0x01c28000
[    0.433634] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
[    1.051478] console [ttyS0] enabled
[    1.057378] G2D: drv_g2d_init
[    1.065036] G2D: g2dmem: g2d_start=50000000, g2d_size=1000000
[    1.074019] G2D: head:d0000000,tail:d1000000
[    1.081624] G2D: Module initialized.major:251
[    1.089628] [drm] Initialized drm 1.1.0 20060810
[    1.096852] brd: module loaded
[    1.104103] loop: module loaded
[    1.110620] [NAND] nand driver version: 0x2 0x9
[    1.150795] Dev Sunxi softw311 nand: part 1, start 32768, size 32768
[    1.162494] Dev Sunxi softw311 nand: part 2, start 65536, size 32768
[    1.174157] Dev Sunxi softw311 nand: part 3, start 98304, size 65536
[    1.186074] Dev Sunxi softw311 nand: part 4, start 163840, size 1048576
[    1.198339] Dev Sunxi softw311 nand: part 5, start 1212416, size 3145728
[    1.210520] Dev Sunxi softw311 nand: part 6, start 4358144, size 32768
[    1.222526] Dev Sunxi softw311 nand: part 7, start 4390912, size 65536
[    1.234616] Dev Sunxi softw311 nand: part 8, start 4456448, size 262144
[    1.246706] Dev Sunxi softw311 nand: part 9, start 4718592, size 32768
[    1.258971] Dev Sunxi softw311 nand: part 10, start 4751360, size 1048576
[    1.271497] Dev Sunxi softw311 nand: part 11, start 5799936, size 9764864
[    1.284975]  nand: nanda nandb nandc nandd nande nandf nandg nandh nandi nandj nandk
[    1.296065] [NAND]nand driver, ok.
[    1.302986] sunxi_emac Using mii phy on PortA
[    1.321970] sunxi_emac Using MAC from FEX: 00:ce:39:b6:25:7e
[    1.334736] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.346633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.355083] [sw-ehci1]: open clock
[    1.381074] [sw-ehci1]: Set USB Power ON
[    1.391438] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.404935] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
[    1.417617] sw-ehci sw-ehci.1: irq 39, io mem 0x01c14000
[    1.438859] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
[    1.446864] ehci_irq: port change detect
[    1.454007] hub 1-0:1.0: USB hub found
[    1.460678] hub 1-0:1.0: 1 port detected
[    1.467043] [sw-ohci1]: open clock
[    1.496485] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    1.509633] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
[    1.520980] sw-ohci sw-ohci.1: irq 64, io mem 0x01c14400
[    1.591653] hub 2-0:1.0: USB hub found
[    1.598324] hub 2-0:1.0: 1 port detected
[    1.604663] [sw-ehci2]: open clock
[    1.630640] [sw-ehci2]: Set USB Power ON
[    1.640999] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.654491] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
[    1.666868] sw-ehci sw-ehci.2: irq 40, io mem 0x01c1c000
[    1.789894] usb 1-1: new high-speed USB device number 2 using sw-ehci
[    1.818850] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
[    1.826861] ehci_irq: port change detect
[    1.833995] hub 3-0:1.0: USB hub found
[    1.840659] hub 3-0:1.0: 1 port detected
[    1.847021] [sw-ohci2]: open clock
[    1.876465] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    1.889612] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
[    1.901029] sw-ohci sw-ohci.2: irq 65, io mem 0x01c1c400
[    1.971671] hub 4-0:1.0: USB hub found
[    1.978338] hub 4-0:1.0: 1 port detected
[    1.986343] Initializing USB Mass Storage driver...
[    1.996367] usbcore: registered new interface driver usb-storage
[    2.006013] USB Mass Storage support registered.
[    2.015594] usbcore: registered new interface driver ums-alauda
[    2.026562] usbcore: registered new interface driver ums-cypress
[    2.037601] usbcore: registered new interface driver ums-datafab
[    2.049045] usbcore: registered new interface driver ums_eneub6250
[    2.058082] hub 1-1:1.0: USB hub found
[    2.066851] usbcore: registered new interface driver ums-freecom
[    2.075862] hub 1-1:1.0: 4 ports detected
[    2.084808] usbcore: registered new interface driver ums-isd200
[    2.095833] usbcore: registered new interface driver ums-jumpshot
[    2.106750] usbcore: registered new interface driver ums-karma
[    2.117699] usbcore: registered new interface driver ums-onetouch
[    2.128827] usbcore: registered new interface driver ums-realtek
[    2.139776] usbcore: registered new interface driver ums-sddr09
[    2.150632] usbcore: registered new interface driver ums-sddr55
[    2.161401] usbcore: registered new interface driver ums-usbat
[    2.172378] usbcore: registered new interface driver usbserial
[    2.183744] usbcore: registered new interface driver usbserial_generic
[    2.194312] USB Serial support registered for generic
[    2.289889] usb 3-1: new high-speed USB device number 2 using sw-ehci
[    2.450352] usbserial: USB Serial Driver core
[    2.459358] usbcore: registered new interface driver cp210x
[    2.469090] USB Serial support registered for cp210x
[    2.478860] usbcore: registered new interface driver ftdi_sio
[    2.489989] USB Serial support registered for FTDI USB Serial Device
[    2.501280] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[    2.511762] usbcore: registered new interface driver ir-usb
[    2.521592] USB Serial support registered for IR Dongle
[    2.530137] ir_usb: v0.5:USB IR Dongle driver
[    2.539085] usbcore: registered new interface driver pl2303
[    2.548614] USB Serial support registered for pl2303
[    2.558256] mousedev: PS/2 mouse device common for all mice
[    2.566003] [kpad]: sw keypad init
[    2.573864] sw keypad fetch keypad uning configuration failed
[    2.586241] keypad: cannot find using configuration, return without doing anything!
[    2.599570] usb 1-1.3: new full-speed USB device number 3 using sw-ehci
[    2.611515] input: sun4i-keyboard as /devices/virtual/input/input0
[    2.622795] input: sunxi-ir as /devices/virtual/input/input1
[    2.629932] IR Initial OK
[    2.638106] ===========================hv_keypad_init=====================
[    2.648433] ========HV Inital ===================
[    2.657056] tkey_fetch_sysconfig_para: tkey_unused.
[    2.669289] hv_keypad_init: after fetch_sysconfig_para:  normal_i2c: 0x0. normal_i2c[1]: 0x0
[    2.683599] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
[    2.692228] i2c /dev entries driver
[    2.699276] config i2c gpio with gpio_config api
[    2.709556] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
[    2.719238] i2c i2c-0: Invalid probe address 0x00
[    2.726980] I2C: i2c-0: AW16XX I2C adapter
[    2.736598] lirc_dev: IR Remote Control driver registered, major 250
[    2.746572] IR NEC protocol handler initialized
[    2.754894] IR RC5(x) protocol handler initialized
[    2.763242] IR RC6 protocol handler initialized
[    2.771305] IR JVC protocol handler initialized
[    2.779434] IR Sony protocol handler initialized
[    2.788605] IR RC5 (streamzap) protocol handler initialized
[    2.797845] IR SANYO protocol handler initialized
[    2.807408] IR MCE Keyboard/mouse protocol handler initialized
[    2.816688] IR LIRC bridge handler initialized
[    2.822943] [ace_drv] start!!!
[    2.828332] [ace_drv] init end!!!
[    2.833363] [pa_drv] start!!!
[    2.838526] [pa_drv] init end!!!
[    2.844349] axp20_ldo1: 1300 mV
[    2.853618] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
[    2.863715] axp20_ldo3: 700 <--> 3500 mV at 2800 mV
[    2.874066] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
[    2.884222] axp20_buck2: 700 <--> 2275 mV at 1400 mV
[    2.894444] axp20_buck3: 700 <--> 3500 mV at 1250 mV
[    2.904301] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
[    2.918963] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input2
[    2.947151] axp20_ldo2: Failed to create debugfs directory
[    2.957318] sunxi_wdt: sunxi WatchDog Timer Driver v1.0
[    2.967403] sunxi_wdt: initialized (timeout=23s, nowayout=0)
[    2.976477] Bluetooth: HCI UART driver ver 2.2
[    2.984669] Bluetooth: HCI H4 protocol initialized
[    2.993378] Bluetooth: HCI BCSP protocol initialized
[    3.002002] Bluetooth: HCILL protocol initialized
[    3.009884] cpuidle: using governor ladder
[    3.016845] cpuidle: using governor menu
[    3.024842] [mmc_pm]: no sdio card used in configuration
[    3.032082] [mmc]: sunximmc_init
[    3.039568] [mmc]: sunxi mmc controller using config : 0x1
[    3.049971] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
[    3.058774] [mmc]: mmc 0 power off !!
[    3.069906] [mmc]: mmc0 Probe: base:0xf1c0f000 irq:32 dma:0 pdes:0xcfc00000, ret 0.
[    3.080004] sunxi_leds driver init
[    3.087191] Registered led device: red:ph10:led1
[    3.095535] Registered led device: blue:ph20:led2
[    3.112810] input: Logitech G500 as /devices/platform/sw-ehci.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input3
[    3.131577] generic-usb 0003:046D:C068.0001: input: USB HID v1.11 Mouse [Logitech G500] on usb-sw-ehci-1.3/input0
[    3.155817] input: Logitech G500 as /devices/platform/sw-ehci.1/usb1/1-1/1-1.3/1-1.3:1.1/input/input4
[    3.174998] generic-usb 0003:046D:C068.0002: input: USB HID v1.11 Keyboard [Logitech G500] on usb-sw-ehci-1.3/input1
[    3.190148] usbcore: registered new interface driver usbhid
[    3.198518] usbhid: USB HID core driver
[    3.210138] asoc: sndspdif <-> sunxi-spdif.0 mapping ok
[    3.223655] [I2S]sunxi-i2s cannot find any using configuration for controllers, return directly!
[    3.239842] [I2S]sndi2s cannot find any using configuration for controllers, return directly!
[    3.251766] IPv4 over IPv4 tunneling driver
[    3.258706] TCP: cubic registered
[    3.265235] Initializing XFRM netlink socket
[    3.273387] NET: Registered protocol family 10
[    3.281925] NET: Registered protocol family 17
[    3.289813] NET: Registered protocol family 15
[    3.298209] Bluetooth: RFCOMM TTY layer initialized
[    3.307256] Bluetooth: RFCOMM socket layer initialized
[    3.315104] Bluetooth: RFCOMM ver 1.11
[    3.323121] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.332608] Bluetooth: BNEP filters: protocol multicast
[    3.341009] 8021q: 802.1Q VLAN Support v1.8
[    3.349833] [mmc_pm]: No sdio card, please check your config !!
[    3.359426] Registering the dns_resolver key type
[    3.366074] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    3.382307] Registering SWP/SWPB emulation handler
[    3.391650] axp20_buck2: Failed to create debugfs directory
[    3.401060] registered taskstats version 1
[    3.409621] I2C: i2c-1: HDMI I2C adapter
[    3.435697] ParseEDID
[    3.542953] EDID version: 1.4
[    3.551755] PCLK=76300000 X 1366 1382 1398 1576 Y 768 771 785 806 fr 60 NN
[    3.564455] PCLK=50870000 X 1366 1382 1398 1576 Y 768 771 785 806 fr 40 NN
[    3.577191] disp_clk: Could not find a matching pll-freq for 50850000 pclk
[    3.589892] disp_clk: Could not find a matching pll-freq for 76300000 pclk
[    3.600772] EDID: No modes with good pixelclock found
[    3.611780] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
[    3.624402] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[    4.057872] [mmc]: mmc 0 detect change, present 1
[    4.356748] [mmc]: mmc 0 power on !!
[    4.398122] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 52,  RTO !!
[    4.410871] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 52,  RTO !!
[    4.438111] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5,  RTO !!
[    4.450673] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5,  RTO !!
[    4.463238] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5,  RTO !!
[    4.475803] [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5,  RTO !!
[    4.531515] mmc0: new high speed SDHC card at address 0007
[    4.568156] mmcblk0: mmc0:0007 SD8GB 7.42 GiB
[    4.597666]  mmcblk0: p1 p2
[    4.847142] Console: switching to colour frame buffer device 160x45
[    4.874931] axp20_buck3: incomplete constraints, leaving on
[    4.885284] axp20_buck2: incomplete constraints, leaving on
[    4.895551] axp20_ldo4: incomplete constraints, leaving on
[    4.905726] axp20_ldo3: incomplete constraints, leaving on
[    4.915897] axp20_ldo2: incomplete constraints, leaving on
[    4.926075] axp20_ldo1: incomplete constraints, leaving on
[    4.939188] sunxi-rtc sunxi-rtc: setting system clock to 2017-09-18 10:10:59 UTC (1505729459)
[    4.949721] ALSA device list:
[    4.955734]   #0: sunxi-CODEC  Audio Codec
[    4.962027]   #1: sunxi-sndspdif
[    4.967363]   #2: sunxi-sndhdmi
[    4.981239] kjournald starting.  Commit interval 5 seconds
[    4.991006] EXT3-fs (mmcblk0p2): using internal journal
[    5.002095] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[    5.013983] VFS: Mounted root (ext3 filesystem) on device 179:2.
[    5.023901] devtmpfs: mounted
[    5.029791] Freeing init memory: 176K
[    5.306440] systemd[1]: systemd 206 running in system mode. (-PAM +LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP -GCRYPT +ACL +XZ)
[    5.340792] systemd[1]: Set hostname to <meleg>.
[    5.627981] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    5.642835] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.655254] systemd[1]: Expecting device dev-ttyS0.device...
[    5.689490] systemd[1]: Expecting device dev-ttyUSB0.device...
[    5.718164] systemd[1]: Starting Syslog Socket.
[    5.748485] systemd[1]: Listening on Syslog Socket.
[    5.757549] systemd[1]: Starting Remote File Systems.
[    5.789180] systemd[1]: Reached target Remote File Systems.
[    5.799979] systemd[1]: Expecting device dev-multi-user.device...
[    5.829019] systemd[1]: Starting Delayed Shutdown Socket.
[    5.859348] systemd[1]: Listening on Delayed Shutdown Socket.
[    5.870845] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    5.900573] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.910949] systemd[1]: Starting Root Slice.
[    5.938317] systemd[1]: Created slice Root Slice.
[    5.947444] systemd[1]: Starting User and Session Slice.
[    5.979364] systemd[1]: Created slice User and Session Slice.
[    5.988715] systemd[1]: Starting System Slice.
[    6.018490] systemd[1]: Created slice System Slice.
[    6.026429] systemd[1]: Starting Slices.
[    6.048035] systemd[1]: Reached target Slices.
[    6.058556] systemd[1]: Starting system-usb\x2dserial\x2dtouchscreen.slice.
[    6.090997] systemd[1]: Created slice system-usb\x2dserial\x2dtouchscreen.slice.
[    6.102521] systemd[1]: Starting system-getty.slice.
[    6.129019] systemd[1]: Created slice system-getty.slice.
[    6.139396] systemd[1]: Starting system-serial\x2dgetty.slice.
[    6.169873] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    6.180619] systemd[1]: Starting udev Kernel Socket.
[    6.208932] systemd[1]: Listening on udev Kernel Socket.
[    6.218719] systemd[1]: Starting udev Control Socket.
[    6.248998] systemd[1]: Listening on udev Control Socket.
[    6.258208] systemd[1]: Starting Journal Socket.
[    6.288582] systemd[1]: Listening on Journal Socket.
[    6.302278] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.344836] systemd[1]: Started Load Kernel Modules.
[    6.354991] systemd[1]: Mounting FUSE Control File System...
[    6.391435] systemd[1]: Mounting Configuration File System...
[    6.452561] systemd[1]: Starting Apply Kernel Variables...
[    6.507743] systemd[1]: Mounted Huge Pages File System.
[    6.520972] systemd[1]: Mounted POSIX Message Queue File System.
[    6.532599] systemd[1]: Starting udev Coldplug all Devices...
[    6.560766] systemd[1]: Mounting Debug File System...
[    6.590689] systemd[1]: Starting Journal Service...
[    6.648513] systemd[1]: Started Journal Service.
[    6.660483] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.700210] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.715691] systemd[1]: Starting Paths.
[    6.727947] systemd[1]: Reached target Paths.
[    6.740478] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.783123] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.803982] systemd[1]: Started Set Up Additional Binary Formats.
[    6.813023] systemd[1]: Starting Swap.
[    6.837923] systemd[1]: Reached target Swap.
[    6.847445] systemd[1]: Started File System Check on Root Device.
[    6.859392] systemd[1]: Starting Remount Root and Kernel File Systems...
[    6.890790] systemd[1]: Mounting Temporary Directory...
[    7.039476] systemd[1]: Mounted FUSE Control File System.
[    7.086583] systemd[1]: Mounted Configuration File System.
[    7.138877] systemd[1]: Started Apply Kernel Variables.
[    7.218570] systemd[1]: Mounted Debug File System.
[    7.260203] systemd[1]: Started Remount Root and Kernel File Systems.
[    7.308811] systemd[1]: Mounted Temporary Directory.
[    7.352713] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.389101] systemd[1]: Started udev Coldplug all Devices.
[    7.403029] systemd[1]: Starting Create static device nodes in /dev...
[    7.431192] systemd[1]: Starting Load/Save Random Seed...
[    7.462185] systemd[1]: Started Machine ID first boot configure.
[    7.509963] systemd[1]: Started Create static device nodes in /dev.
[    7.538788] systemd[1]: Started Load/Save Random Seed.
[    7.549090] systemd[1]: Starting udev Kernel Device Manager...
[    7.581366] systemd[1]: Starting Local File Systems (Pre).
[    7.615504] systemd-udevd[75]: starting version 206
[    7.625738] systemd[1]: Reached target Local File Systems (Pre).
[    7.636563] systemd[1]: Mounting /var/volatile...
[    7.664959] systemd[1]: var-volatile.mount: Directory /var/volatile to mount over is not empty, mounting anyway.
[    7.749333] systemd[1]: Started udev Kernel Device Manager.
[    7.858284] systemd[1]: Mounted /var/volatile.
[    7.867031] systemd[1]: Starting Local File Systems.
[    7.979240] systemd[1]: Reached target Local File Systems.
[    8.019365] systemd[1]: Starting Trigger Flushing of Journal to Persistent Storage...
[    8.135842] systemd[1]: Starting Recreate Volatile Files and Directories...
[    8.516425] systemd[1]: Starting Sound Card.
[    8.628592] systemd[1]: Reached target Sound Card.
[    8.780489] systemd[1]: Started Recreate Volatile Files and Directories.
[    8.841611] systemd[1]: Starting Update UTMP about System Reboot/Shutdown...
[    8.962424] systemd[1]: Started Run pending postinsts.
[    9.064382] usbcore: registered new interface driver rtl8192cu
[    9.098626] systemd[1]: Found device /dev/ttyS0.
[    9.251821] systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
[    9.460576] systemd[1]: Started Update UTMP about System Reboot/Shutdown.
[    9.510912] systemd[1]: Starting System Initialization.
[    9.580122] systemd[1]: Reached target System Initialization.
[    9.620825] systemd[1]: Started Manage Sound Card State (restore and store).
[    9.683848] systemd[1]: Starting Restore Sound Card State...
[    9.751223] systemd[1]: Starting dropbear.socket.
[    9.858818] systemd[1]: Listening on dropbear.socket.
[    9.870033] systemd[1]: Starting Avahi mDNS/DNS-SD Stack Activation Socket.
[   10.001081] systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[   10.061551] systemd[1]: Starting Daily Cleanup of Temporary Directories.
[   10.127250] systemd[1]: Started Daily Cleanup of Temporary Directories.
[   10.192791] systemd[1]: Starting Timers.
[   10.228094] systemd[1]: Reached target Timers.
[   10.237835] systemd[1]: Starting D-Bus System Message Bus Socket.
[   10.280044] systemd[1]: Listening on D-Bus System Message Bus Socket.
[   10.297599] systemd[1]: Starting Sockets.
[   10.328130] systemd[1]: Reached target Sockets.
[   10.336266] systemd[1]: Starting Basic System.
[   10.358567] systemd[1]: Reached target Basic System.
[   10.367841] systemd[1]: Starting Connection service...
[   10.390988] systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
[   10.422067] systemd[1]: Starting LSB: Remove /etc/nologin at boot...
[   10.467856] systemd[1]: Started SSH Key Generation.
[   10.481527] systemd[1]: Starting Set CPU governor to performance...
[   10.511181] systemd[1]: Starting Kernel Logging Service...
[   10.578977] systemd[1]: Started Kernel Logging Service.
[   10.599481] systemd[1]: Starting System Logging Service...
[   10.668948] systemd[1]: Started System Logging Service.
[   10.687523] systemd[1]: Starting Permit User Sessions...
[   10.730155] systemd[1]: Starting Login Service...
[   10.771108] systemd[1]: Starting D-Bus System Message Bus...
[   10.829126] systemd[1]: Started D-Bus System Message Bus.
[   10.853150] systemd[1]: Starting Xserver startup with a display manager...
[   10.960325] systemd[1]: Started Xserver startup with a display manager.
[   11.012818] systemd[1]: Starting Calaos home automation touchscreen UI...
[   11.110213] systemd[1]: Started Calaos home automation touchscreen UI.
[   11.189105] systemd[1]: Started Restore Sound Card State.
[   11.260086] systemd[1]: Started LSB: Remove /etc/nologin at boot.
[   11.309712] systemd[1]: Started Set CPU governor to performance.
[   11.358753] systemd[1]: Started Permit User Sessions.
[   11.382247] systemd[1]: Starting Getty on tty1...
[   11.448168] systemd[1]: Started Getty on tty1.
[   11.457317] systemd[1]: Starting Serial Getty on ttyS0...
[   11.527400] systemd[1]: Started Serial Getty on ttyS0.
[   11.548959] systemd[1]: Starting Login Prompts.
[   11.590034] systemd[1]: Reached target Login Prompts.
[   12.267695] Warning: this sunxi disp driver will see significant redesign.
[   12.304059] Applications using /dev/disp directly will break.
[   12.343118] For more information visit: http://linux-sunxi.org/Sunxi_disp_driver
[   12.407734] [DISP] layer allocated: 0,101
[   12.513563] UMP<2>: Inserting UMP device driver. Compiled: Sep 11 2014, time: 17:57:08
[   12.573413] UMP<2>: Using OS memory backend, allocation limit: 134217728
[   12.620754] UMP: UMP device driver  loaded
[   12.673450] Mali: permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x51000000, size=33554432)
[   12.760766] mali: use config clk_div 4
[   12.784340] mali: clk_div 4
[   12.800787] Mali: mali clock set completed, clock is  240000000 Hz
[   12.859468] mali: use config clk_div 4
[   12.879975] mali: clk_div 4
[   12.895124] Mali: mali clock set completed, clock is  240000000 Hz
[   12.939162] Mali: Mali device driver loaded
[   13.021074] Mali DRM initialize, driver name: mali_drm, version 2.1
[   13.075386] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
[   13.107917] Mali DRM initialize, driver name: mali_drm, version 2.1
[   13.152061] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1
[   13.622356] [cedar dev]: install start!!!
[   13.648055] [cedar dev]: install end!!!
[   13.653960] UMP<2>: New session opened
[   14.571382] sunxi_emac sunxi_emac.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[   14.637598] UMP<2>: New session opened
[   15.306235] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[   15.415777] ParseEDID
[   15.539176] EDID version: 1.4
[   15.556572] PCLK=76300000 X 1366 1382 1398 1576 Y 768 771 785 806 fr 60 NN
[   15.616410] PCLK=50870000 X 1366 1382 1398 1576 Y 768 771 785 806 fr 40 NN
[   15.670364] disp_clk: Could not find a matching pll-freq for 50850000 pclk
[   15.676192] disp_clk: Could not find a matching pll-freq for 76300000 pclk
[   21.848419] sunxi-rtc sunxi-rtc: actually set time to 2017-9-18 10:11:16
[  207.889940] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[  208.039256] ParseEDID
[  208.163760] EDID version: 1.4
[  208.187696] PCLK=76300000 X 1366 1382 1398 1576 Y 768 771 785 806 fr 60 NN
[  208.228602] PCLK=50870000 X 1366 1382 1398 1576 Y 768 771 785 806 fr 40 NN
[  208.268471] disp_clk: Could not find a matching pll-freq for 50850000 pclk
[  208.281786] disp_clk: Could not find a matching pll-freq for 76300000 pclk

=> La connexion de l'usb pour le coté tactile à eu lieu à partir de 207...

Et voici le lsusb -vvv :

Code:
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            9 Hub
 bDeviceSubClass         0 Unused
 bDeviceProtocol         1 Single TT
 bMaxPacketSize0        64
 idVendor           0x05e3 Genesys Logic, Inc.
 idProduct          0x0608 USB-2.0 4-Port HUB
 bcdDevice           77.64
 iManufacturer           0
 iProduct                1 USB2.0 Hub
 iSerial                 0
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           25
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xe0
     Self Powered
     Remote Wakeup
   MaxPower              100mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         9 Hub
     bInterfaceSubClass      0 Unused
     bInterfaceProtocol      0 Full speed (or root) hub
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0001  1x 1 bytes
       bInterval              12
Hub Descriptor:
 bLength               9
 bDescriptorType      41
 nNbrPorts             4
 wHubCharacteristic 0x00e0
   Ganged power switching
   Ganged overcurrent protection
   TT think time 32 FS bits
   Port indicators
 bPwrOn2PwrGood       50 * 2 milli seconds
 bHubContrCurrent    100 milli Ampere
 DeviceRemovable    0x00
 PortPwrCtrlMask    0xff
Hub Port Status:
  Port 1: 0000.0100 power
  Port 2: 0000.0100 power
  Port 3: 0000.0103 power enable connect
  Port 4: 0000.0100 power
Device Qualifier (for other device speed):
 bLength                10
 bDescriptorType         6
 bcdUSB               2.00
 bDeviceClass            9 Hub
 bDeviceSubClass         0 Unused
 bDeviceProtocol         0 Full speed (or root) hub
 bMaxPacketSize0        64
 bNumConfigurations      1
Device Status:     0x0001
 Self Powered

Bus 003 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0
 bDeviceProtocol         0
 bMaxPacketSize0        64
 idVendor           0x0bda Realtek Semiconductor Corp.
 idProduct          0x8176 RTL8188CUS 802.11n WLAN Adapter
 bcdDevice            2.00
 iManufacturer           1 Realtek
 iProduct                2 802.11n WLAN Adapter
 iSerial                 3 00e04c000001
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           46
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0x80
     (Bus Powered)
   MaxPower              500mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           4
     bInterfaceClass       255 Vendor Specific Class
     bInterfaceSubClass    255 Vendor Specific Subclass
     bInterfaceProtocol    255 Vendor Specific Protocol
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x02  EP 2 OUT
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x03  EP 3 OUT
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x84  EP 4 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0040  1x 64 bytes
       bInterval               1
Device Qualifier (for other device speed):
 bLength                10
 bDescriptorType         6
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0
 bDeviceProtocol         0
 bMaxPacketSize0        64
 bNumConfigurations      1
Device Status:     0x0000
 (Bus Powered)

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            9 Hub
 bDeviceSubClass         0 Unused
 bDeviceProtocol         0 Full speed (or root) hub
 bMaxPacketSize0        64
 idVendor           0x1d6b Linux Foundation
 idProduct          0x0002 2.0 root hub
 bcdDevice            3.04
 iManufacturer           3 Linux 3.4.79 ehci_hcd
 iProduct                2 SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
 iSerial                 1 sw-ehci
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           25
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xe0
     Self Powered
     Remote Wakeup
   MaxPower                0mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         9 Hub
     bInterfaceSubClass      0 Unused
     bInterfaceProtocol      0 Full speed (or root) hub
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0004  1x 4 bytes
       bInterval              12
Hub Descriptor:
 bLength               9
 bDescriptorType      41
 nNbrPorts             1
 wHubCharacteristic 0x000a
   No power switching (usb 1.0)
   Per-port overcurrent protection
 bPwrOn2PwrGood       10 * 2 milli seconds
 bHubContrCurrent      0 milli Ampere
 DeviceRemovable    0x00
 PortPwrCtrlMask    0xff
Hub Port Status:
  Port 1: 0000.0503 highspeed power enable connect
Device Status:     0x0001
 Self Powered

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               1.10
 bDeviceClass            9 Hub
 bDeviceSubClass         0 Unused
 bDeviceProtocol         0 Full speed (or root) hub
 bMaxPacketSize0        64
 idVendor           0x1d6b Linux Foundation
 idProduct          0x0001 1.1 root hub
 bcdDevice            3.04
 iManufacturer           3 Linux 3.4.79 ohci_hcd
 iProduct                2 SW USB2.0 'Open' Host Controller (OHCI) Driver
 iSerial                 1 sw-ohci
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           25
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xe0
     Self Powered
     Remote Wakeup
   MaxPower                0mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         9 Hub
     bInterfaceSubClass      0 Unused
     bInterfaceProtocol      0 Full speed (or root) hub
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0002  1x 2 bytes
       bInterval             255
Hub Descriptor:
 bLength               9
 bDescriptorType      41
 nNbrPorts             1
 wHubCharacteristic 0x0012
   No power switching (usb 1.0)
   No overcurrent protection
 bPwrOn2PwrGood        2 * 2 milli seconds
 bHubContrCurrent      0 milli Ampere
 DeviceRemovable    0x00
 PortPwrCtrlMask    0xff
Hub Port Status:
  Port 1: 0000.0100 power
Device Status:     0x0001
 Self Powered

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            9 Hub
 bDeviceSubClass         0 Unused
 bDeviceProtocol         0 Full speed (or root) hub
 bMaxPacketSize0        64
 idVendor           0x1d6b Linux Foundation
 idProduct          0x0002 2.0 root hub
 bcdDevice            3.04
 iManufacturer           3 Linux 3.4.79 ehci_hcd
 iProduct                2 SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
 iSerial                 1 sw-ehci
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           25
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xe0
     Self Powered
     Remote Wakeup
   MaxPower                0mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         9 Hub
     bInterfaceSubClass      0 Unused
     bInterfaceProtocol      0 Full speed (or root) hub
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0004  1x 4 bytes
       bInterval              12
Hub Descriptor:
 bLength               9
 bDescriptorType      41
 nNbrPorts             1
 wHubCharacteristic 0x000a
   No power switching (usb 1.0)
   Per-port overcurrent protection
 bPwrOn2PwrGood       10 * 2 milli seconds
 bHubContrCurrent      0 milli Ampere
 DeviceRemovable    0x00
 PortPwrCtrlMask    0xff
Hub Port Status:
  Port 1: 0000.0503 highspeed power enable connect
Device Status:     0x0001
 Self Powered

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               1.10
 bDeviceClass            9 Hub
 bDeviceSubClass         0 Unused
 bDeviceProtocol         0 Full speed (or root) hub
 bMaxPacketSize0        64
 idVendor           0x1d6b Linux Foundation
 idProduct          0x0001 1.1 root hub
 bcdDevice            3.04
 iManufacturer           3 Linux 3.4.79 ohci_hcd
 iProduct                2 SW USB2.0 'Open' Host Controller (OHCI) Driver
 iSerial                 1 sw-ohci
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           25
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xe0
     Self Powered
     Remote Wakeup
   MaxPower                0mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         9 Hub
     bInterfaceSubClass      0 Unused
     bInterfaceProtocol      0 Full speed (or root) hub
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0002  1x 2 bytes
       bInterval             255
Hub Descriptor:
 bLength               9
 bDescriptorType      41
 nNbrPorts             1
 wHubCharacteristic 0x0012
   No power switching (usb 1.0)
   No overcurrent protection
 bPwrOn2PwrGood        2 * 2 milli seconds
 bHubContrCurrent      0 milli Ampere
 DeviceRemovable    0x00
 PortPwrCtrlMask    0xff
Hub Port Status:
  Port 1: 0000.0100 power
Device Status:     0x0001
 Self Powered

Bus 001 Device 003: ID 046d:c068 Logitech, Inc. G500 Laser Mouse
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0
 bDeviceProtocol         0
 bMaxPacketSize0         8
 idVendor           0x046d Logitech, Inc.
 idProduct          0xc068 G500 Laser Mouse
 bcdDevice           58.02
 iManufacturer           1 Logitech
 iProduct                2 G500
 iSerial                 3 C54E30C03F0018
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           59
   bNumInterfaces          2
   bConfigurationValue     1
   iConfiguration          4 U58.02_B0018
   bmAttributes         0xa0
     (Bus Powered)
     Remote Wakeup
   MaxPower               98mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         3 Human Interface Device
     bInterfaceSubClass      1 Boot Interface Subclass
     bInterfaceProtocol      2 Mouse
     iInterface              0
       HID Device Descriptor:
         bLength                 9
         bDescriptorType        33
         bcdHID               1.11
         bCountryCode            0 Not supported
         bNumDescriptors         1
         bDescriptorType        34 Report
         wDescriptorLength      67
        Report Descriptors:
          ** UNAVAILABLE **
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0008  1x 8 bytes
       bInterval               1
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        1
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         3 Human Interface Device
     bInterfaceSubClass      0 No Subclass
     bInterfaceProtocol      0 None
     iInterface              0
       HID Device Descriptor:
         bLength                 9
         bDescriptorType        33
         bcdHID               1.11
         bCountryCode            0 Not supported
         bNumDescriptors         1
         bDescriptorType        34 Report
         wDescriptorLength     122
        Report Descriptors:
          ** UNAVAILABLE **
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x82  EP 2 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0014  1x 20 bytes
       bInterval               1
Device Status:     0x0000
 (Bus Powered)


Si tu as besoin d'autre chose, n'hésite pas.
Reply
#44
Dans les logs que tu donnes il y a 0 infos sur le tactile... Undecided
Raoul,
Calaos Core Dev.
Calaos git sur NUC NUC5PPYH | Wago 750-849 | DALI RGB | Sondes NTC sur 750-464 | Sondes 1Wire DS18B20 avec adaptateur USB DS9490R | Nodes MySensors avec gateway USB | Ecran tactile ELO avec adaptateur USB/RS232 | Squeezebox Duet et Radio | Logitech Harmony Ultimate | Ampli Pioneer VSX921
Reply
#45
(09-22-2017, 10:35 AM)raoulh Wrote: Dans les logs que tu donnes il y a 0 infos sur le tactile... Undecided
De mémoire c'était les commandes que tu m'avais demandé sur l'irc il y a quasi 1an, dsl
Peux-tu me dire les commandes dont tu as besoin ?
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)