Amplificateur Yamaha

Liste des commandes dans calaos installer

Fonctionne avec la serie rx

  • Volume X
  • Power on
  • Power off
  • source X
BD -> source 4
DVD -> source 5
TVSAT -> source 6
DVRBDR -> source 7
VIDEO 1 -> source 8
VIDEO 2 -> source 9
VIDEO 3 -> source 10
VIDEO 4 -> source 11
VIDEO 5 -> source 12
VIDEO 6 -> source 13
VIDEO 7 -> source 14
VIDEO 8 -> source 15
NETRADIO -> source 16
IPOD -> source 17
HDMI 1 -> source 18
HDMI 2 -> source 19
HDMI 3 -> source 20
HDMI 4 -> source 21
HDMI 5 -> source 22
HDMI 6 -> source 23
HDMI 7 -> source 24
HDMI 8 -> source 25
CD -> source 26
CDRTAPE -> source 27
TUNER -> source 28
PHONO -> source 29
MULTIIN -> source 30
APORT -> source 31
SIRIUS -> source 32
TV -> source 33
SAT -> source 34
GAME 1 -> source 35
GAME 2 -> source 36
AUX -> source 37
DOCK -> source 38
HDRADIO -> source 39
RHAPSODY -> source 40
NAPSTER -> source 41
PANDORA -> source 42
LASTFM -> source 43
FLICKR -> source 44
FAV -> source 45
SERVER -> source 46 
NETWORK -> source 47
USB -> source 48
USB2 -> source 49
USB3 -> source 50
USB4 -> source 51
USB5 -> source 52
USB6 -> source 53
USB7 -> source 54
USB8 -> source 55
VCR -> source 56
AUX1 -> source 57
AUX2 -> source 58
AUX3 -> source 59
AUX4 -> source 60
AUX5 -> source 61
AUX6 -> source 62
AUX7 -> source 63
AUX8 -> source 64
BLUETOOTH -> source 65
IPODUSB -> source 66
PC -> source 67
UAW -> source 68
  • custom cmd

exemple

custom @MAIN:INP=HDMI1

@MAIN @ZONE2 @ZONE3


Command Details of SubUnit: MAIN
PWR
[PUT Command]
@MAIN:PWR=
[Parameters]
Standby :turining its state to Standby 
On :turining its state to On 
On/Standby :toggling its status between On/Standby

SLEEP
[PUT Command]
@MAIN:SLEEP=
[Parameters]
Off :turining its setting state to Off 
30 min :setting to 30 min 
60 min :setting to 60 min 
90 min :setting to 90 min 
120 min :setting to 120 min 
Last :setting to the value set last

VOL
[PUT Command]
@MAIN:VOL=
[Parameters]
Down :decrementing by 1 step (0.5dB)
Up :incrementing by 1 step (0.5dB)
Down 1 dB :decrementing by 1 dB
Up 1 dB :incrementing by 1 dB
Down 2 dB :decrementing by 2 dB
Up 2 dB :incrementing by 2 dB
Down 5 dB :decrementing by 5 dB
Up 5 dB :incrementing by 5 dB
Numerical Number: -80.5 to 16.5, Step: 0.5 :setting to the specified value. 
-80.5 means muting. First decimal place must be always included. Ex: 10.0, -25.0 or 0.0 etc. The unit for this parameter is "dB".

MUTE
[PUT Command]
@MAIN:MUTE=
[Parameters]
Off :turining its state to Off 
Att -40 dB :attenuating by 40 dB from current volume status. 
volume status.
Att -20 dB :attenuating by 20 dB from current volume status. 
volume status.
On :turining its state to On 
On/Off :toggling its status between On/Off

MAXVOL
[PUT Command]
@MAIN:MAXVOL=
[Parameters]
Numerical Number: -30.0 to 15.0, Step: 5.0 :setting to the specified value. 
First decimal place must be always included. Ex: 10.0, -25.0 or 0.0 etc.
The unit for this parameter is "dB".
16.5: setting to the specified value. 
Meaning no limit of maximum volume
The unit for this parameter is "dB".
 
INITVOLMODE
[PUT Command]
@MAIN:INITVOLMODE=
[Parameters]
Offturining its setting state to Off 
On :turining its setting state to On 
 
INITVOLLVL
[PUT Command]
@MAIN:INITVOLLVL=
[Parameters]
Mute :turining its setting state to Mute 
Initially muted when turned on
Numerical Number: -80.0 to 16.5, Step: 0.5
setting to the specified value. 
First decimal place must be always included. Ex: 10.0, -25.0 or 0.0 etc.
The unit for this parameter is "dB".
 
INP
[PUT Command]
@MAIN:INP=
[Parameters]
SIRIUS :selecting input SIRIUS  
TUNER :selecting input TUNER  
HDMI1 :selecting input HDMI1 
HDMI2 :selecting input HDMI2 
HDMI3 :selecting input HDMI3 
HDMI4 :selecting input HDMI4 
HDMI5 :selecting input HDMI5 
AV1 :selecting input AV1 
AV2 :selecting input AV2 
AV3 :selecting input AV3 
AV4 :selecting input AV4 
AV5 :selecting input AV5 
AV6 :selecting input AV6 
V-AUX :selecting input V-AUX  
AUDIO1 :selecting input AUDIO1  
AUDIO2 :selecting input AUDIO2  
DOCK :selecting input DOCK
iPod :selecting input iPod  
Bluetooth :selecting input Bluetooth  
UAW :selecting input UAW  
NET :selecting input NET
Rhapsody :selecting input Rhapsody  
SIRIUS InternetRadio :selecting input SIRIUS InternetRadio  
Pandora :selecting input Pandora  
Napster :selecting input Napster  
PC :selecting input PC  
NET RADIO :selecting input NET RADIO  
USB :selecting input USB
iPod (USB) :selecting input iPod (USB)  
 
DECODERSEL
[PUT Command]
@MAIN:DECODERSEL=
[Parameters]
Auto :turining its setting state to Auto  
Automatically selects audio decoder. Default value.
DTS :turining its setting state to DTS  
Audio decoder is fixed to DTS

SCENE
[PUT Command]
@MAIN:SCENE=
[Parameters]
Scene 1
selecting Scene 1
Scene 2
selecting Scene 2
Scene 3
selecting Scene 3
Scene 4
selecting Scene 4
 
SPBASS
[PUT Command]
@MAIN:SPBASS=
[Parameters]
Numerical Number: -6.0 to 6.0, Step: 0.5
setting to the specified value. 
First decimal place must be always included. Ex: 3.0, -4.0
The unit for this parameter is "dB".
 
SPTREBLE
[PUT Command]
@MAIN:SPTREBLE=
[Parameters]
Parameters are the same as
SPBASS
 
PUREDIRMODE
[PUT Command]
@MAIN:PUREDIRMODE=
[Parameters]
Off :turining its setting state to Off  
On :turining its setting state to On 
 
ADAPTIVEDRC
[PUT Command]
@MAIN:ADAPTIVEDRC=
[Parameters]
Off :turining its setting state to Off  
Auto :turining its setting state to Auto  
 
LIPSYNCMODE
[PUT Command]
@MAIN:LIPSYNCMODE=
[Parameters]
Manual :turining its setting state to Manual 
About "Manual" setting of Lipsync Mode: When selecting "Manual" here, the audio delay value can be
manually set. The effective setting of the audio delay value has some dependencies as follows. In case of
using Analog Video Output only (no HDMI connection is active), audio delay value set by "@MAIN:ANLGOUT"
command is effective. In case that HDMI OUT1 is in active connection, the value set by
"@MAIN:HDMIOUT1MANUAL" command works. Else if HDMI OUT2 is the only one activated, the setting by
"@MAIN:HDMIOUT2MANUAL" is enabled.
Auto :turining its setting state to Auto 
About Lipsync Mode "Auto": Basically, Audio Delay value has 5 different settings internally according to "Video
Output State (5 Status available)". And the 5 different status of "Video Output State" is determined by the
combination of two states of "Display's state of compatibility/incompatibility with Auto Lipsync feature" and
"Current effective HDMI output state (on the receiver)", which means 4 status, plus a status of "Analog Video
Out only in use", summing up to 5 in total. The "Auto" setting of Lipsync Mode is to dynamically change the
Audio Delay value corresponding to a specific status of Video Output State. "Video Output State" can be
retrieved with a command of "@MAIN:SELINFO", and you can set the effective Audio Delay value according to
respective Video Output status by these commands as following;
When "@MAIN:SELINFO=Analog": the audio delay can be set by "@MAIN:ANLGOUT" command
When "@MAIN:SELINFO=HDMI1 Auto" (meaning TV compatible with Auto Lipsync and HDMI OUT1 is
effective): the audio delay can be set by "@MAIN:HDMIOUT1OFFSET" command
When "@MAIN:SELINFO=HDMI1 Manual" (meaning TV incompatible with Auto Lipsync and HDMI OUT1 is
effective): the audio delay can be set by "@MAIN:HDMIOUT1MANUAL" command
When "@MAIN:SELINFO=HDMI2 Auto" (meaning TV compatible with Auto Lipsync and HDMI OUT 2 is the
only one in effective): the audio delay can be set by "@MAIN:HDMIOUT2OFFSET" command
When "@MAIN:SELINFO=HDMI2 Manual" (meaning TV incompatible with Auto Lipsync and HDMI OUT 2 is
the only one in effective): the audio delay can be set by "@MAIN:HDMIOU21MANUAL" command
 
LIPSYNCANLGOUT
[PUT Command]
@MAIN:LIPSYNCANLGOUT=
[Parameters]
Down
incrementing by 1 step (1 millisecond)
Up
decrementing by 1 step (1 millisecond)
Numerical Number: 0 to 250, Step: 1
setting to the specified value. 
The unit for this parameter is "ms".
 
LIPSYNCHDMIOUT1OFFSET
[PUT Command]
@MAIN:LIPSYNCHDMIOUT1OFFSET=
[Parameters]
Down
incrementing by 1 step (1 millisecond)
Up
decrementing by 1 step (1 millisecond)
Numerical Number: -250 to 250, Step: 1
setting to the specified value. 
The unit for this parameter is "ms".
 
LIPSYNCHDMIOUT1MANUAL
[PUT Command]
@MAIN:LIPSYNCHDMIOUT1MANUAL=
[Parameters]
Down
incrementing by 1 step (1 millisecond)
Up
decrementing by 1 step (1 millisecond)
Numerical Number: 0 to 250, Step: 1
setting to the specified value. 
The unit for this parameter is "ms".
 
LIPSYNCHDMIOUT2OFFSET
[PUT Command]
@MAIN:LIPSYNCHDMIOUT2OFFSET=
[Parameters]
Parameters are the same as
LIPSYNCHDMIOUT1OFFSET
 
LIPSYNCHDMIOUT2MANUAL
[PUT Command]
@MAIN:LIPSYNCHDMIOUT2MANUAL=
[Parameters]
Parameters are the same as
LIPSYNCHDMIOUT1MANUAL
 
HDMIOUT
[PUT Command]
@MAIN:HDMIOUT=
[Parameters]
Off :turining its setting state to Off (output is disabled) 
OUT :turining its setting state to OUT (meaning output is enabled)  
 
Initial Auto Feedback is Available
[Parameters]
Hall in Munich :turining its setting state to Hall in Munich 
Hall in Vienna :turining its setting state to Hall in Vienna 
Chamber :turining its setting state to Chamber 
Cellar Club :turining its setting state to Cellar Club 
The Roxy Theatre :turining its setting state to The Roxy Theatre 
The Bottom Line :turining its setting state to The Bottom Line 
Sports :turining its setting state to Sports 
Action Game :turining its setting state to Action Game 
Roleplaying Game :turining its setting state to Roleplaying Game 
Music Video :turining its setting state to Music Video 
Standard :turining its setting state to Standard 
Spectacle :turining its setting state to Spectacle 
Sci-Fi :turining its setting state to Sci-Fi 
Adventure :turining its setting state to Adventure 
Drama :turining its setting state to Drama 
Mono Movie :turining its setting state to Mono Movie 
2ch Stereo :turining its setting state to 2ch Stereo 
7ch Stereo :turining its setting state to 7ch Stereo 
Surround Decoder :turining its setting state to Surround Decoder 
 
ADAPTIVEDSP
[PUT Command]
@MAIN:ADAPTIVEDSP=
[Parameters]
Off :turining its setting state to Off 
Auto :turining its setting state to Auto 
 
3DCINEMA
[PUT Command]
@MAIN:3DCINEMA=
Parameter
 
@MAIN:3DCINEMA=?
Operating & retrieving 3D DSP setting state
[Parameters]
Off :turining its setting state to Off 
Auto :turining its setting state to Auto 
 
EXSURDECODER
[PUT Command]
@MAIN:EXSURDECODER=
Parameter
 
@MAIN:EXSURDECODER=?
Operating & retrieving Extended Surround setting state
[Parameters]
Off :turining its setting state to Off 
Auto :turining its setting state to Auto 
Dolby PLIIx Movie :turining its setting state to Dolby PLIIx Movie 
Dolby PLIIx Music :turining its setting state to Dolby PLIIx Music 
EX/ES :turining its setting state to EX/ES 
 
2CHDECODER
[PUT Command]
@MAIN:2CHDECODER=
[Parameters]
Dolby PL
Dolby PLII Movie :turining its setting state to Dolby PLII Movie 
Dolby PLII Music :turining its setting state to Dolby PLII Music 
Dolby PLII Game :turining its setting state to Dolby PLII Game 
Dolby PLIIx Movie :turining its setting state to Dolby PLIIx Movie 
Dolby PLIIx Music :turining its setting state to Dolby PLIIx Music 
Dolby PLIIx Game :turining its setting state to Dolby PLIIx Game 
DTS NEO:6 Cinema :turining its setting state to DTS NEO:6 Cinema 
DTS NEO:6 Music :turining its setting state to DTS NEO:6 Music 
 
PLAYBACK
[PUT Command]
@MAIN:PLAYBACK=
[Parameters]
Stop : change its state to Stop
Pause